The quick answer
Manpower bill = (gross wages + employer PF + PF admin and EDLI + employer ESI) + service charge + GST. Make one line per worker, add the totals, then raise one GST invoice to the client with the worker-wise statement attached.
That is the whole idea. The hard part is getting the same numbers every month, for every client, without mistakes. This guide shows the format, a full worked example, and the checks that stop a client from rejecting your bill.
Want the numbers for one worker right now? Use our free contract labour payroll calculator. It shows PF, ESI, service charge and GST for any wage.
What is a manpower supply bill?
A manpower supply bill is the monthly invoice that a manpower agency or labour contractor sends to its client (the principal employer). It asks the client to pay for the workers supplied that month. It covers three things:
- The cost of the workers — wages for the days they worked, plus overtime.
- Statutory costs — the employer’s share of PF, PF admin and EDLI charges, and the employer’s share of ESI. Some contracts also include bonus, leave wages or other items.
- Your fee and tax — the agreed service charge, and GST.
The client checks the bill against its own attendance records. If the numbers do not match, payment is held. So the bill must be clear, worker-wise and backed by proof.
Manpower bill format: the columns you need
Most clients want a worker-wise statement attached to the GST invoice. Here is a simple format that works for factories, warehouses and service sites.
| Column | What to put | Why the client needs it |
|---|---|---|
| Worker name and ID | Name and your employee code | Matches the client’s gate and attendance list |
| UAN and ESI number | PF UAN and ESI IP number | Proof the worker is covered |
| Designation / skill | Helper, operator, supervisor… | Different rates for different skills |
| Days worked | Paid days as per approved attendance | The base of the whole bill |
| Overtime hours | OT hours and OT amount | OT is often disputed — show it clearly |
| Gross wages | Basic + DA + allowances + OT for the month | What the worker earned |
| Employer PF | 12% of PF wage | Statutory cost |
| PF admin and EDLI | About 0.5% + 0.5% of PF wage | Statutory cost |
| Employer ESI | 3.25% of gross (if gross is ₹21,000 or less) | Statutory cost |
| Other items (if in contract) | Bonus, leave wages, uniform, etc. | Only what the contract allows |
| Total cost | Sum of the above | Base for service charge |
Swipe sideways to see all columns.
Below the statement, the GST invoice shows: total cost, service charge, taxable value, GST and the grand total. It also needs the usual invoice details — your GSTIN and the client’s GSTIN, invoice number and date, place of supply and the SAC code your CA advises for manpower supply.
How to calculate a manpower bill: 6 steps
- Get approved attendance. Use the attendance the client has signed or approved. Never bill from your own register alone.
- Work out gross wages. For each worker: paid days × daily rate (or monthly rate ÷ days in month × paid days), plus allowances and overtime.
- Work out the PF wage and employer PF. PF wage is usually basic + DA. Take 12% for the employer share, plus about 0.5% admin and 0.5% EDLI. Many contracts cap the PF wage at ₹15,000.
- Work out employer ESI. If the worker’s gross wage is ₹21,000 a month or less, add 3.25% of gross.
- Add the service charge. Apply the agreed % on the total cost (or on wages, if that is what your contract says).
- Add GST and raise the invoice. GST on manpower supply is usually 18% of the taxable value. Attach the worker-wise statement and proofs.
Worked example: one worker and a team of 20
Say a helper earns a gross wage of ₹16,000 a month. The PF wage (basic + DA) is ₹12,000. Your service charge in the contract is 8% on total cost.
| Line | How | 1 worker (₹) | 20 workers (₹) |
|---|---|---|---|
| Gross wages | Given | 16,000 | 3,20,000 |
| Employer PF | 12% of 12,000 | 1,440 | 28,800 |
| PF admin | 0.5% of 12,000 | 60 | 1,200 |
| EDLI | 0.5% of 12,000 | 60 | 1,200 |
| Employer ESI | 3.25% of 16,000 | 520 | 10,400 |
| Total cost | Sum | 18,080 | 3,61,600 |
| Service charge | 8% of total cost | 1,446 | 28,928 |
| Taxable value | Total cost + service charge | 19,526 | 3,90,528 |
| GST | 18% of taxable value | 3,515 | 70,295 |
| Bill amount | Taxable value + GST | 23,041 | 4,60,823 |
Swipe sideways to see all columns. Figures rounded to the nearest rupee.
Notice two things. First, the worker’s own PF (12%) and ESI (0.75%) are not added to the bill — they are cut from the worker’s salary, not paid on top. Second, the service charge is your real income. On this example it is ₹1,446 per worker, which must cover your staff, office and risk. If payroll mistakes cost you even a few hundred rupees per worker, much of your margin is gone.
What changed with the new Labour Codes?
India’s four Labour Codes took effect on 21 November 2025. Two points matter most for a manpower bill:
- The 50% wage rule. Allowances that are left out of “wages” (such as HRA and overtime) cannot be more than half of total pay. If they are, the extra is added to wages. For a worker with a very low basic, the PF and ESI wage can go up — and so does the employer cost you bill. Our calculator has a tick box to test this.
- Contract labour threshold. The contract labour rules now apply where 50 or more contract workers are engaged (earlier 20).
Many state rules are still being finalised, and the advice for now is to follow existing rules during the transition. If your rate card was fixed before the codes, talk to your client about how a higher PF wage will be billed. Put it in writing.
Checklist: what to send with every bill
- Attendance summary approved by the client, for the same period as the bill
- Worker-wise salary statement (wage register)
- PF ECR and PF challan for the previous month
- ESI challan for the previous month
- Proof that salaries were paid to workers’ bank accounts
- GST invoice with both GSTINs, place of supply and SAC code
- A note of any changes: new joiners, exits, wage revisions
Why does the client want all this? Under Indian law the principal employer can be asked to pay unpaid PF or ESI for contract workers, and then recover it from the contractor. A clean, complete bill tells the client you are a safe contractor — and gets you paid faster.
Common mistakes that delay payment
- Billing from your own attendance instead of the client’s approved attendance.
- Adding the worker’s PF and ESI to the bill — the client will reject it.
- Applying service charge on the wrong base (on wages when the contract says total cost, or the other way round).
- Charging ESI for workers above ₹21,000 gross, or missing it for workers below it.
- Different numbers in the bill and the salary statement because they were made in two separate Excel files.
- Missing PF and ESI proofs for the previous month.
- One bill format for every client when each client has its own rates and rules.
Excel or software?
With one or two clients, a careful Excel sheet can work. As you add clients, the problems grow: each client has its own attendance file, rates, overtime and PF rule, and the salary, PF/ESI files and the bill are made separately. That is where numbers stop matching.
| Task | Excel | ContractPay |
|---|---|---|
| Client attendance | Retyped or pasted | Upload the client’s own Excel |
| Each client’s rules | Separate formulas | Saved once per client |
| Mistake check | After payment | Flagged before approval |
| PF ECR, ESI, bank file | Made by hand | One click |
| Client invoice | Separate sheet | Made from the same payroll |
Swipe sideways to see all columns.
ContractPay was made for manpower contractors. All client companies sit on one screen, workers are added once, and payslips, the bank file, PF ECR file, ESI file, salary statement and client invoice come from the same data.
Country notes
India: this guide follows Indian PF, ESI and GST practice. Rates and rules change, and states may have their own rules — check with your consultant or CA.
Gulf (UAE, Saudi Arabia, Qatar, Oman): manpower companies usually pay salaries through the country’s wage protection system, and there is no PF or ESI. The bill is usually salary cost plus visa, insurance and other agreed costs, plus the agency fee and VAT where it applies.
Other countries: the same idea works — worker cost + statutory cost + fee + tax — but with local social security and tax rules. DinMind can build custom payroll and billing software for your country.
General information only, not legal or tax advice. Rules change — always check with a local advisor.