How-to Guide · Safety

Mock Drill Report Format for Factories: Fire Evacuation Drill Template and Checklist

A mock drill is only useful if you learn from it. This guide gives you a clear mock drill report format for fire and evacuation drills in factories and warehouses, a filled example, a simple way to take the headcount at the assembly point, a before-during-after checklist, and the mistakes that make drill reports useless.

The quick answer

A mock drill report should record: site and area, date, type of drill (fire, gas leak, chemical spill, other), announced or surprise, alarm time, time the last person reached the assembly point, total people on site, people counted at each assembly point, people missing and how they were found, what went well, problems seen, corrective actions with owner and due date, and sign-off. The two most important numbers are how long the evacuation took and whether everyone — employees, contractors and visitors — was accounted for.

A drill report is not paperwork for the file. It is the only proof that your emergency plan works, and the best list of what to fix before a real emergency.

What is a mock drill report?

A mock drill report (also called a fire drill report, evacuation drill report or emergency drill record) is the written record of a practice emergency. The safety team raises an alarm, everyone leaves the building by the planned routes, wardens count people at the assembly points, and the team notes what happened.

The report has three jobs:

  • Proof: show inspectors, fire officers, customers and auditors that drills happen and are taken seriously.
  • Learning: find blocked exits, slow areas, missing wardens and people who did not hear the alarm.
  • Follow-up: turn each problem into an action with an owner and a date, and check it at the next drill.

Mock drill report format: the 15 fields to include

Use this format on paper, in Excel or in software. Each field has a reason.

#FieldWhy it matters
1Site, building and areaLarge plants drill one block at a time; you must know which
2Date and shiftNight and weekend shifts often have fewer trained wardens
3Type of drillFire, gas leak, chemical spill, bomb threat, earthquake
4Announced or surpriseSurprise drills show the real response
5ScenarioFor example: “Fire in paint shop, exit 3 blocked”
6Alarm timeThe start point for every time you measure
7Time last person reached the assembly pointGives the evacuation time
8Time everyone was accounted forThe time that really matters to a rescue team
9Total people on site at alarm timeEmployees, contractors and visitors, from gate records
10Count at each assembly pointShows which routes and points are used
11People missing, and how they were foundEvery gap in the count is a lesson
12Wardens and roles presentFire wardens, first aid, search team, emergency controller
13What went well / problems seenAlarm not heard, exit blocked, lift used, people went back for bags
14Corrective actions, owner, due dateWithout an owner and a date, nothing changes
15Sign-offSafety officer and plant head or factory manager

Swipe sideways to see all columns.

Attach the attendance or headcount sheets from each assembly point, and photos if your policy allows.

A filled example

Here is how a short report might look for a fire drill in one building. The numbers are only an example.

FieldExample entry
Site / areaPlant 1, assembly building
Date / shift14-11-2026, General shift
Type / announced?Fire drill, surprise
ScenarioSmoke in Bay 3, exit near Bay 3 treated as blocked
Alarm time10:00
Last person at assembly point10:05
Everyone accounted for10:11
On site at alarm time208 (162 employees, 38 contractors, 8 visitors)
Count by pointA: 84, B: 56, C: 64; 4 not checked in
Missing and found2 contractors at the wrong assembly point; 1 visitor left earlier but was not signed out; 1 employee on leave but marked present
ProblemsAlarm weak in the store room; contractor list was on paper and out of date
ActionsAdd a sounder in the store room (Maintenance, 30-11-2026); brief contractors on assembly points (Safety, 21-11-2026); fix gate sign-out (Security, 21-11-2026)
Sign-offSafety officer, Plant head

Swipe sideways to see all columns.

Notice that none of the four “missing” people were really in danger. They were record errors. That is the most common finding in real drills, and it is exactly what slows down a real rescue: the team cannot tell a record error from a person trapped inside.

How to take the headcount at the assembly point

The headcount (roll call or mustering) is the heart of the drill. A good method in 7 steps:

  1. Freeze the list at alarm time. Take the list of everyone on site from gate attendance, the contractor register and the visitor register. A list printed in the morning is already wrong.
  2. Give each assembly point a warden. One warden and one back-up per point, with a list or a phone.
  3. Count by name, not by heads. “We have 84 people” does not tell you who is missing.
  4. Include contractors and visitors. Ask hosts to bring their visitors. Supervisors bring their contract teams.
  5. Report to one emergency controller. Each warden reports the count and any names missing.
  6. Search with a last known area. The search team needs to know where the missing person was last seen, not only a name.
  7. Close every name. Every missing name ends as “found” with where and when. Only then is the count complete.

Many safety rules expect this step. For example, OSHA’s emergency action plan rule in the USA (29 CFR 1910.38) lists “procedures to account for all employees after evacuation” as a minimum part of the plan, and UK fire service guidance asks for a roll call at the assembly point.

Mock drill checklist: before, during and after

Before the drill

  • Choose the scenario, area and whether it is announced or a surprise.
  • Tell the fire service, security and any critical process owners if your rules ask for it.
  • Check that wardens, first aiders and the search team know their roles.
  • Check assembly point signs, exits and emergency lights.
  • Keep observers with stopwatches at key exits.

During the drill

  • Note the alarm time and whether the alarm was heard everywhere.
  • Watch for lifts used, people going back for bags, blocked exits and crowding.
  • Note when the last person reaches each assembly point.
  • Record the headcount and every missing name.

After the drill

  • Hold a 10-minute debrief with wardens while it is fresh.
  • Fill the report the same day.
  • Assign each corrective action an owner and a due date.
  • Check last drill’s actions: were they closed?
  • Compare evacuation time with past drills.

How to measure evacuation time

Record two times, not one:

  • Evacuation time: from the alarm until the last person is checked in at an assembly point.
  • Accounted-for time: from the alarm until every person on the site list is either checked in or found.

The second time is usually longer, and it is the one a rescue team cares about. If the first time is short but the second is long, your problem is not the exits — it is your records. There is no single target time that fits every building; your fire risk assessment and local fire officer set what is right for your site. Track your own times drill after drill and aim to improve them.

8 common mistakes in mock drills and drill reports

  1. Using a headcount list printed at the start of the shift.
  2. Forgetting contractors, drivers and visitors.
  3. Counting heads instead of names.
  4. Always running drills at the same time, announced, on the day shift.
  5. Writing the report days later from memory.
  6. Listing problems with no owner and no due date.
  7. Never checking whether last drill’s actions were closed.
  8. Keeping reports in a file nobody can search when an auditor asks.

How often should you run a mock drill? Notes by country

  • India: Factories are expected to keep an on-site emergency plan and run regular mock drills. The frequency comes from your state rules (being updated under the new Labour Codes, including the OSH Code) and your fire NOC conditions. Hazardous process units usually face stricter rules.
  • USA: OSHA’s rule 29 CFR 1910.38 requires an emergency action plan that includes procedures to account for all employees after evacuation. Employers with 10 or fewer employees may share the plan orally.
  • UK: Government fire safety guidance says to carry out a fire drill at least once a year, or as your fire risk assessment decides, and more often if staff turnover is high.
  • Australia: Work health and safety rules require an emergency plan with evacuation procedures, and the plan should be tested.
  • Gulf and South-East Asia: Civil defence and fire authorities set drill and evacuation requirements, often by building type. Check with your local authority.

General information only, not legal advice. Rules change — always check with a local advisor.

Paper vs Excel vs emergency headcount software

NeedPaper listExcel sheetHeadcount software
Who is on site at alarm timePrinted earlier, out of dateOnly if someone updated itTaken live from gate and visitor records
Contractors and visitorsOften missingOften missingIncluded
Count at assembly pointsNames read aloudNot usable outdoorsScan or tick on a phone
Missing peopleFound after comparing listsFound after the drillFlagged at once with last known area
Drill reportWritten laterTyped laterMade automatically
Compare drills over timeVery hardPossibleEasy
Cost to startVery lowVery lowSoftware and phones for wardens

Swipe sideways to see all columns.

When should you move drill records to software?

Paper works for one building with a few dozen people. Think about software when:

  • You have more than one building, shift or site.
  • Contract workers and visitors are a big part of the people on site.
  • Your last drill had “missing” people who were only record errors.
  • Auditors or customers ask for drill history and it takes days to find.

SafeCount, DinMind’s emergency evacuation headcount software, was built for this job. When the drill starts it loads everyone on site from gate attendance, GateCheck contractor records and VizPass visitor records. Wardens check people in on a phone, the live screen shows who is still inside, and the drill report is made automatically. Most DinMind modules go live in 4–8 weeks.

FAQ

Quick answers

What should a mock drill report include?

At least the site, date, type of drill, start time of the alarm, time the last person reached the assembly point, total people on site, people counted at each assembly point, people missing and found, problems seen, corrective actions with owner and due date, and the sign-off of the safety officer.

How do you calculate evacuation time in a drill?

Evacuation time is the time from the alarm to the moment the last person is checked in at an assembly point. Also record a second time: from the alarm until everyone on site is accounted for, including people found by the search team.

How often should a factory conduct a mock drill?

It depends on local law and your fire risk assessment. UK fire safety guidance says at least once a year, and more often if staff turnover is high. In India the frequency comes from state rules and fire NOC conditions. Many plants drill every quarter or once per shift.

Who should sign the mock drill report?

Usually the safety officer or fire officer who ran the drill, and the plant head or factory manager. Add the names of the assembly point wardens who did the headcount.

Should contractors and visitors be included in the drill?

Yes. They are on site, they are at risk and they are the people most often missed in a paper roll call. Load them from the gate, contractor and visitor records before the count starts.

Can a mock drill report be made automatically?

Yes. Emergency evacuation headcount software such as DinMind SafeCount records the alarm time, every check-in at each assembly point and every missing person, and builds the drill report for you.

Free demo

See SafeCount run your next drill

Free 15-minute demo. No sales pressure. Fixed quote in 24 hours.

  • No sales pressure
  • Free blueprint
  • Fixed price in 24 hours

Keep reading

All guides
Safety · 7 min read

Work Permit Software Guide

How digital permits to work keep hot work and confined space jobs safe.